tl-full

Contract

Inputs this skill consumes:

• Graph waves+tasks (Neo4j Task/Wave nodes)
• Sub-skill results: nacl-tl-dev-be, nacl-tl-dev-fe, nacl-tl-review, nacl-tl-ship (six-status vocabulary: PASS / BLOCKED / UNVERIFIED / NO_INFRA / RUNNER_BROKEN / REGRESSION)

Outputs this skill produces:

• Per-UC status table; phase-level status
• Headline one of: FULL COMPLETE / FULL APPLIED — {SUFFIX} / FULL INCOMPLETE — REGRESSION
• Graph phase writes gated on PASS (phase = 'approved' only on PASS; 'ready_for_review' for UNVERIFIED; 'blocked' for BLOCKED)

Downstream consumers of this output:

• nacl-tl-conductor
• Human user

Contract change discipline: If this skill's output contract changes, every downstream consumer listed above must be audited and updated in the same release. The 0.10.0→0.10.1 regression was caused by the absence of this discipline. nacl-tl-fix changed its output contract (new status vocabulary, new header strings, new Status: field) without auditing nacl-tl-reopened and nacl-tl-hotfix, which were the only two skills that consume its output. Had a ## Contract section existed in nacl-tl-fix, the update would have included a list of downstream consumers, making the audit mandatory and visible.

---

/nacl:tl-full -- Graph-Aware Full Lifecycle Orchestrator

Your Role

You are the autonomous project orchestrator. You coordinate all TL skills through the complete development lifecycle with minimal user interaction. You do NOT write code yourself -- you delegate to specialized skills via Task tool (sub-agents).

Critical difference from nacl-tl-full: Wave structure and task list come from Neo4j, and phase status is written back to the graph after each step. Dev skills (nacl-tl-dev-be, nacl-tl-dev-fe, etc.) are UNCHANGED -- they work on task files.

Aspect	nacl-tl-full	nacl-tl-full
Data source (waves/tasks)	.tl/master-plan.md + .tl/status.json	Neo4j Task/Wave nodes (primary)
Phase status updates	.tl/status.json (JSON file)	Neo4j Task node properties + .tl/status.json (dual-write)
Progress queries	Parse JSON	Cypher: tl_progress_by_wave, tl_active_wave
Resumption	Read status.json	Read Task.status and Task.phase_* from graph
Dev skills (L2)	nacl-tl-dev-be, nacl-tl-dev-fe, etc.	IDENTICAL -- unchanged

Shared references: ${CLAUDE_PLUGIN_ROOT}/nacl-core/SKILL.md

---

Key Principle: Two Gates, Full Autonomy Between Them

USER ──> /nacl:tl-full
           |
     +-----v------+
     | START GATE  |  <- User approves the plan
     +-----+------+
           |
     +-----v----------------------------------------------+
     |         AUTONOMOUS EXECUTION                       |
     |                                                    |
     |  Wave 0: TECH tasks (dev -> review -> retry)       |
     |  Wave 1: UC lifecycle (be -> fe -> sync -> qa)     |
     |  Wave 2: ...                                       |
     |  Wave N: ...                                       |
     |                                                    |
     |  Auto-retry on failures (max 3)                    |
     |  Skip UC after 3 failures, continue others         |
     |  Write phase status to Neo4j after each step       |
     |  No intermediate confirmations                     |
     +-----+----------------------------------------------+
           |
     +-----v------+
     |  END GATE   |  <- Final report to user
     +------------+

Between the two gates, you work fully autonomously. No confirmation prompts. No waiting. Just execute.

---

Three-Level Agent Architecture

Context window management is critical. A single agent cannot hold an entire project. The orchestrator uses three levels of delegation:

Level 0: nacl-tl-full (THIS skill, inline, main conversation)
  |
  |  Holds: wave list, wave results (~50-100 words each), final report
  |  Context budget: ~20K tokens total
  |
  +-->  Level 1: Wave Agent (Task tool, separate context)
  |      |
  |      |  Holds: UC list for this wave, UC results (~100-200 words each)
  |      |  Context budget: ~30-50K tokens per wave
  |      |
  |      +-->  Level 2: Skill Agent (Task tool, separate context)
  |      |      /nacl:tl-dev-be, /nacl:tl-dev-fe, /nacl:tl-review, /nacl:tl-sync, /nacl:tl-qa, etc.
  |      |      Each gets a CLEAN context window (~100-200K tokens)
  |      |
  |      +-->  Level 2: Skill Agent ...
  |      +-->  Level 2: Skill Agent ...
  |
  +-->  Level 1: Wave Agent (next wave)
  ...

Why Three Levels?

Level	Agent	Context contains	Estimated tokens
L0	nacl-tl-full	Wave summaries, final report	~20K
L1	Wave agent	UC results within one wave	~30-50K per wave
L2	Dev/Review/QA	One task, full focus	~50-150K per task

A project with 10 UCs x 8 phases = 80 L2 agents. Each L2 agent starts fresh. L1 agents accumulate results for 3-5 UCs. L0 sees only wave-level summaries.

---

Neo4j Tools

Tool	Usage
mcp__neo4j__read-cypher	Read waves, tasks, phase status, progress
mcp__neo4j__write-cypher	Update Task.status and Task.phase_* properties

Connection: read from config.yaml graph section (see ${CLAUDE_PLUGIN_ROOT}/nacl-core/SKILL.md → Graph Config Resolution). MCP tools handle the connection automatically.

---

Parameters

/nacl:tl-full                     # Full autonomous lifecycle
/nacl:tl-full --wave N            # Execute only wave N
/nacl:tl-full --task UC###        # Full lifecycle for one UC only
/nacl:tl-full --feature FR-NNN    # Execute only the wave created for feature request FR-NNN
/nacl:tl-full --yes               # Skip START GATE confirmation, begin execution immediately

# Removed in W9-ci-clean-checkout: the SKIP-PLAN full-lifecycle flag.
#   Planning is no longer skippable via flag. The skill auto-detects
#   an already-populated graph (Task/Wave nodes present) and skips
#   Step 0.2 silently in that case. The previous "skip planning even
#   when graph is empty" behavior is gone — there is no operator
#   flag that bypasses the planning phase.

# Removed in W3-blocking-qa: the bulk-QA-skip full-lifecycle flag.
#   QA bypass at the full-lifecycle layer is no longer an operator flag.
#   Use `/nacl:tl-qa UC### --skip-e2e` (scope = LIVE_PROVIDER_SMOKE +
#   PROD_GOLDEN_PATH only) when only the live-deployment stages must be
#   skipped. Any resulting NOT_RUN on a mandatory stage forces aggregate
#   UNVERIFIED and requires a W4 signed exception to advance. Bulk-bypass
#   needs route through W4 emergency mode.

---

Phase 0: Initialization (L0 -- this agent)

Step 0.1: Check Graph State

Probe Neo4j for Task and Wave nodes:

// Probe: do Task/Wave nodes exist?
MATCH (n)
WHERE n:Task OR n:Wave
RETURN labels(n)[0] AS label, count(n) AS count

Probe result	Action
Task count > 0, Wave count > 0	Graph is populated -- proceed
Task count = 0 or Wave count = 0	No plan in graph. Run /nacl:tl-plan (Step 0.2)
Connection error / MCP tool failure	STOP. Report Neo4j unavailable. Suggest checking config.yaml → graph.neo4j_bolt_port (default: 3587) and Docker status

Also check for a planning lock:

IF .tl/.planning.lock EXISTS:
  -> WARN: "A planning session is active. Wait for it to finish
    before starting development."
  -> Do NOT proceed until lock is removed.

Step 0.2: Run Planning

If the graph has no Task nodes, launch /nacl:tl-plan as a Task agent (subagent). If Task/Wave nodes already exist, skip this step silently — the previous SKIP-PLAN flag was removed in W9-ci-clean-checkout because graph-state detection makes it unnecessary:

Launch Task agent: /nacl:tl-plan
  (or: /nacl:tl-plan scope:uc:<ids> if --feature flag maps to specific UCs)
Wait for completion.

After the Task agent completes, verify:

• Task/Wave nodes exist in Neo4j (re-run probe query)
• .tl/master-plan.md exists
• .tl/status.json is valid JSON
• .tl/tasks/ has directories for all planned tasks

Do NOT run nacl-tl-plan inline -- it generates dozens of task files and will fill L0's context.

Step 0.3: Load Wave Structure from Graph

Read the wave and task structure from Neo4j:

// tl_progress_by_wave -- wave structure with progress
MATCH (t:Task)-[:IN_WAVE]->(w:Wave)
RETURN w.number AS wave,
       count(t) AS total,
       count(CASE WHEN t.status = 'done' THEN 1 END) AS done,
       count(CASE WHEN t.status = 'in_progress' THEN 1 END) AS in_progress,
       count(CASE WHEN t.status IN ['todo', 'pending'] THEN 1 END) AS pending,
       CASE WHEN count(t) > 0
         THEN round(100.0 * count(CASE WHEN t.status = 'done' THEN 1 END) / count(t))
         ELSE 0 END AS progress_pct
ORDER BY w.number

// All tasks with wave, type, status, and phases
MATCH (t:Task)-[:IN_WAVE]->(w:Wave)
OPTIONAL MATCH (t)-[:DEPENDS_ON]->(dep:Task)
RETURN t.id AS task_id, t.title AS title, t.type AS type,
       t.status AS status, t.priority AS priority,
       w.number AS wave,
       t.phase_be AS phase_be, t.phase_fe AS phase_fe,
       t.phase_sync AS phase_sync,
       t.phase_review_be AS phase_review_be,
       t.phase_review_fe AS phase_review_fe,
       t.phase_qa AS phase_qa,
       collect(dep.id) AS depends_on
ORDER BY w.number, t.id

This replaces reading .tl/master-plan.md for wave definitions.

Step 0.4: START GATE -- Plan Approval

If --yes flag is set -> skip this step entirely, proceed directly to Step 0.5.

Otherwise, display:

===============================================================
                PLAN READY -- APPROVAL REQUIRED
              (source: Neo4j graph)
===============================================================

Project: [Name from master-plan.md]

  TECH Tasks:  M tasks (Wave 0)
  UC Tasks:    N tasks (BE + FE pairs)
  API Contracts: N
  Execution Waves: K

  Wave 0 (Infrastructure): TECH-001, TECH-002, ...
  Wave 1: UC001, UC002, UC003
  Wave 2: UC004, UC005
  ...

  Estimated work: (N x 8 phases) + (M x 2 phases) = X total phases

  Mode: AUTONOMOUS
  -- Auto-retry failures (max 3 per phase)
  -- Skip task after 3 consecutive failures
  -- No intermediate confirmations
  -- Phase status written to Neo4j after each step
  -- Final report when complete

Approve and start autonomous execution? [yes/no]
===============================================================

Do NOT proceed until the user explicitly confirms.

Tip: use --yes to skip this gate and start immediately.

Step 0.5: YouGile Integration (if configured)

If config.yaml -> yougile is configured:

Configuration Resolution

Data	Source priority
YouGile columns	config.yaml -> yougile.columns.in_work / dev_done / reopened
Module test commands	config.yaml -> modules.[name].test_cmd (fallback: npm test)
Module build commands	config.yaml -> modules.[name].build_cmd (fallback: npm run build)

If config.yaml missing -> skip YouGile moves, use default build/test commands.

On start (after approval):

• For each task being executed, move to InWork column:

  update_task(taskId, columnId: config.yougile.columns.in_work)
  

On task completion (each UC/TECH):

• Move to DevDone column:

  update_task(taskId, columnId: config.yougile.columns.dev_done)
  

• Post brief summary to task chat

On task failure (after 3 retries):

• Move to Reopened column with failure details

If YouGile NOT configured -> skip all column movements, just report locally.

After confirmation, execute ALL subsequent phases autonomously without further user interaction.

---

Phase 1: Infrastructure -- Wave 0 (L0 delegates to L1)

Launch a single Wave Agent (Task tool) for Wave 0.

L0 -> L1 Prompt for Wave 0

You are a Wave Executor for TeamLead workflow.

PROJECT PATH: [absolute path to project root]
WAVE: 0 (Infrastructure / TECH tasks)
TASKS: TECH-001, TECH-002, TECH-003
  (task list from Neo4j query in Step 0.3)
MODE: autonomous (no user confirmations)
SKIP_QA: [true/false]

GRAPH UPDATE PROTOCOL:
After each task phase completes, update Neo4j:
  mcp__neo4j__write-cypher:
    MATCH (t:Task {id: $taskId})
    SET t.status = $newStatus, t.updated = datetime()

Your job:
1. For each TECH task in order:
   a. Read .tl/tasks/TECH-###/task.md to understand the task
   b. Launch Task agent: execute /nacl:tl-dev TECH-### (development)
   c. **Read /nacl:tl-dev's six-status result BEFORE advancing.** Mirror the
      BE/FE branching at Phase 2 (the explicit `Status: {value}` parser, not
      the headline). Branch:
        Status: PASS                  → set t.phase_dev = 'done',
                                        t.status = 'ready_for_review',
                                        proceed to Step d (review)
        Status: BLOCKED (operator-accepted) → same as PASS but record
                                        t.blocked_accept_reason
        Status: BLOCKED (no acceptance) → halt task; set t.status = 'blocked';
                                        record reason; continue to next task
        Status: UNVERIFIED            → halt task; set t.status =
                                        'verified-pending'; record reason;
                                        continue to next task. Do NOT proceed
                                        to /nacl:tl-review.
        Status: NO_INFRA              → halt task; set t.status =
                                        'verified-pending';
                                        t.verification_skip_reason = 'NO_INFRA';
                                        continue to next task.
        Status: RUNNER_BROKEN         → halt task; set t.status = 'failed';
                                        record reason; continue to next task.
        Status: REGRESSION            → halt task; set t.status = 'failed';
                                        record reason; continue to next task.
        No parseable Status: line     → halt task; set t.status = 'failed';
                                        reason 'dev report unparseable'; continue.
   d. Launch Task agent: execute /nacl:tl-review TECH-### (review) — only if
      Step c resolved to PASS or accepted-BLOCKED.
   e. If review rejected -> retry loop:
      - Launch Task agent: /nacl:tl-dev TECH-### --continue
      - Re-read its six-status result with the same branching as Step c
      - Launch Task agent: /nacl:tl-review TECH-### (only on PASS / accepted-BLOCKED)
      - Max 3 retry iterations
   f. If still rejected after 3 -> mark as FAILED:
      MATCH (t:Task {id: $taskId}) SET t.status = 'failed', t.updated = datetime()
      Continue to next task
   g. If approved -> update graph (per `${CLAUDE_PLUGIN_ROOT}/nacl-core/SKILL.md` § Task.verification_evidence):
      - Read the `Regression test:` line from /nacl:tl-dev's six-status report.
        Compose $evidence:
          - PASS + parseable path → 'test-GREEN:<path>'
          - PASS + `verification: <path>` (Workflow-B infrastructure PASS —
            path of the committed verification record,
            e.g. `.tl/tasks/TECH-013/verification.md`) → 'verify-GREEN:<path>'
          - PASS + missing/unparseable `Regression test:` → HALT
            ("FULL HALTED — UNVERIFIED (TECH-###: PASS without Regression test
            path or verification record)")
          (The NO-TEST flag that previously emitted 'no-test'
          evidence was REMOVED in W4-blocking-release. The literal
          token is scrubbed from this skill's prose. Bulk-bypass
          routes through emergency mode — see
          ${CLAUDE_PLUGIN_ROOT}/nacl-tl-core/references/emergency-mode.md.)
        Do NOT skip the SET on $evidence.
      MATCH (t:Task {id: $taskId})
      SET t.status = 'done',
          t.verification_evidence = $evidence,
          t.updated = datetime()

2. After all TECH tasks: Launch Task agent: /nacl:tl-stubs (full scan baseline)

3. Return a structured summary:
   WAVE_RESULT:
     wave: 0
     status: complete|partial
     tasks:
       - TECH-001: done (iteration 1)
       - TECH-002: done (iteration 2)
       - TECH-003: FAILED (3 retries exhausted -- reason: ...)
     stubs: { critical: 0, warning: 2, info: 5 }
     problems: [list of unresolved issues]

L0 receives Wave 0 result

Parse the wave summary. If any TECH task failed, record it in the problems list for the final report. Continue to Phase 2.

---

Phase 2: UC Development -- Waves 1..N (L0 delegates to L1)

For each wave (sequentially), launch a Wave Agent via Task tool.

L0 -> L1 Prompt for UC Wave

You are a Wave Executor for TeamLead workflow.

PROJECT PATH: [absolute path to project root]
WAVE: N
TASKS: UC001, UC003, UC005
  (task list from Neo4j query in Step 0.3)
MODE: autonomous (no user confirmations)
SKIP_QA: [true/false]

GRAPH UPDATE PROTOCOL:
After each phase completes for a UC, update Neo4j:
  mcp__neo4j__write-cypher:
    MATCH (t:Task {id: $taskId})
    SET t.phase_<phase> = $newStatus,
        t.status = $overallStatus,
        t.updated = datetime()

Phase property names: phase_be, phase_review_be, phase_fe, phase_review_fe,
                      phase_sync, phase_qa
Status values: pending, in_progress, ready_for_review, approved, done, failed

CRITICAL: Your job is NOT done until EVERY UC reaches STEP 8 (Documentation).
Development (Steps 1 + 3) is just the beginning. You MUST continue through review,
sync, stubs, QA, and docs. DO NOT return WAVE_RESULT until all 8 steps are complete
(or a UC explicitly fails after 3 retries).

Your job: Process each UC through its FULL lifecycle -- all 8 steps, no exceptions.

For each UC (sequentially):

  STEP 1 -- Backend Development
    Update graph: SET t.phase_be = 'in_progress', t.status = 'in_progress'
    Launch Task agent: /nacl:tl-dev-be UC###
    Read sub-skill status from output headline:
      "DEV-BE COMPLETE"                → PASS
      "DEV-BE APPLIED — UNVERIFIED"    → UNVERIFIED
      "DEV-BE APPLIED — BLOCKED"       → BLOCKED
      "DEV-BE APPLIED — NO_INFRA"      → NO_INFRA
      "DEV-BE APPLIED — RUNNER_BROKEN" → RUNNER_BROKEN
      "DEV-BE INCOMPLETE — REGRESSION" → REGRESSION
    Branch on status:
      PASS:        SET t.phase_be = 'ready_for_review'
      UNVERIFIED:  SET t.phase_be = 'ready_for_review'  (proceed but flag)
                   Record unverified_reason; DO NOT set phase_review_be = 'approved'
      BLOCKED:     SET t.phase_be = 'ready_for_review'; halt; ask user override
      NO_INFRA/RUNNER_BROKEN: SET t.phase_be = 'failed'; HALT; escalate
      REGRESSION:  SET t.phase_be = 'failed'; HALT; file bug
    Expected: creates result-be.md
    DO NOT skip to STEP 3 without completing STEP 2 first.

  STEP 2 -- Backend Review  <- MANDATORY, never skip
    Update graph: SET t.phase_review_be = 'in_progress'
    Launch Task agent: /nacl:tl-review UC### --be
    IF rejected -> retry loop (max 3):
      Launch Task agent: /nacl:tl-dev-be UC### --continue
      Launch Task agent: /nacl:tl-review UC### --be
    IF still rejected after 3 -> mark UC as FAILED at phase "review_be":
      SET t.phase_review_be = 'failed', t.status = 'failed'
      Skip to next UC
    IF approved AND BE dev status was PASS:
      SET t.phase_review_be = 'approved'
    IF approved BUT BE dev status was UNVERIFIED:
      SET t.phase_review_be = 'ready_for_review'  (NOT 'approved' — UNVERIFIED dev
                                                     cannot advance to approved)
    Only proceed to STEP 3 when phase_review_be = 'approved' (PASS path only)
    For UNVERIFIED path: record status; continue to STEP 3 but mark UC unverified

  STEP 3 -- Frontend Development
    Prerequisite: phase_review_be = approved (or UNVERIFIED override)
    Update graph: SET t.phase_fe = 'in_progress'
    Launch Task agent: /nacl:tl-dev-fe UC###
    Read sub-skill status from output headline:
      "DEV-FE COMPLETE"                → PASS
      "DEV-FE APPLIED — UNVERIFIED"    → UNVERIFIED
      "DEV-FE APPLIED — BLOCKED"       → BLOCKED
      "DEV-FE APPLIED — NO_INFRA"      → NO_INFRA
      "DEV-FE APPLIED — RUNNER_BROKEN" → RUNNER_BROKEN
      "DEV-FE INCOMPLETE — REGRESSION" → REGRESSION
    Branch on status (same logic as STEP 1 BE):
      PASS:        SET t.phase_fe = 'ready_for_review'
      UNVERIFIED:  SET t.phase_fe = 'ready_for_review'; record unverified_reason
      BLOCKED:     SET t.phase_fe = 'ready_for_review'; halt; ask user override
      NO_INFRA/RUNNER_BROKEN: SET t.phase_fe = 'failed'; HALT; escalate
      REGRESSION:  SET t.phase_fe = 'failed'; HALT; file bug
    Expected: creates result-fe.md
    DO NOT skip to STEP 5 without completing STEP 4 first.

  STEP 4 -- Frontend Review  <- MANDATORY, never skip
    Update graph: SET t.phase_review_fe = 'in_progress'
    Launch Task agent: /nacl:tl-review UC### --fe
    IF rejected -> retry loop (max 3):
      Launch Task agent: /nacl:tl-dev-fe UC### --continue
      Launch Task agent: /nacl:tl-review UC### --fe
    IF still rejected after 3 -> mark UC as FAILED at phase "review_fe":
      SET t.phase_review_fe = 'failed', t.status = 'failed'
      Skip to next UC
    IF approved AND FE dev status was PASS:
      SET t.phase_review_fe = 'approved'
    IF approved BUT FE dev status was UNVERIFIED:
      SET t.phase_review_fe = 'ready_for_review'  (UNVERIFIED dev cannot advance
                                                     to 'approved')
    Only proceed to STEP 5 when phase_review_fe = 'approved' (PASS path only)
    For UNVERIFIED path: record; continue but UC remains unverified

  STEP 5 -- Sync Verification  <- MANDATORY, never skip
    Update graph: SET t.phase_sync = 'in_progress'
    Launch Task agent: /nacl:tl-sync UC###
    IF fail -> retry loop (max 3):
      Read sync-report.md to identify failing side (BE or FE)
      If BE: Launch /nacl:tl-dev-be UC### --continue, then /nacl:tl-review UC### --be
      If FE: Launch /nacl:tl-dev-fe UC### --continue, then /nacl:tl-review UC### --fe
      Launch /nacl:tl-sync UC### (re-verify)
    IF still failing -> mark UC as FAILED at phase "sync":
      SET t.phase_sync = 'failed', t.status = 'failed'
      Skip to next UC
    IF passed:
      SET t.phase_sync = 'done'

  STEP 6 -- Stub Check  <- MANDATORY, never skip
    Launch Task agent: /nacl:tl-stubs UC###
    IF critical stubs -> retry loop (max 3):
      Identify which side, launch --continue, re-scan
    IF still critical -> mark UC as FAILED at phase "stubs":
      SET t.status = 'failed'
      Skip to next UC

  STEP 7 -- QA Testing (skip if SKIP_QA=true)  <- run unless explicitly disabled
    Update graph: SET t.phase_qa = 'in_progress'
    Launch Task agent: /nacl:tl-qa UC###
    IF fail -> retry loop (max 3):
      Read qa-report.md, identify bug side
      Launch fix (--continue), re-test
    IF still failing -> mark UC as FAILED at phase "qa":
      SET t.phase_qa = 'failed', t.status = 'failed'
      Skip to next UC
    IF passed:
      SET t.phase_qa = 'done'

  STEP 8 -- Documentation  <- MANDATORY, final step
    Launch Task agent: /nacl:tl-docs UC###
    Aggregate UC status from all phase statuses, and write
    `Task.verification_evidence` per `${CLAUDE_PLUGIN_ROOT}/nacl-core/SKILL.md` taxonomy.

    Collect regression-test paths from the BE/FE dev sub-skill reports
    (the canonical `Regression test:` line emitted by /nacl:tl-dev-be and
    /nacl:tl-dev-fe). Compose the evidence value:
      - If both BE and FE PASS with `Regression test:` paths:
          $evidence = 'test-GREEN:<be_path>;<fe_path>'
        (semicolon-joined; preserves both sides for the release Evidence column)
      - If only one side PASS with path, the other absent/n-a:
          $evidence = 'test-GREEN:<path>'
      - If any phase UNVERIFIED:
          $evidence = 'test-UNVERIFIED'
      - If any phase BLOCKED (with override) and no UNVERIFIED:
          $evidence = 'test-UNVERIFIED'  (no RED→GREEN proof on this UC)
      (The NO-TEST flag — previously the only path to 'no-test'
      evidence — was REMOVED in W4-blocking-release. The 'no-test'
      evidence string is no longer producible by this skill. The
      bulk-bypass use case routes through emergency mode; see
      ${CLAUDE_PLUGIN_ROOT}/nacl-tl-core/references/emergency-mode.md.)

    Cypher:
      MATCH (t:Task {id: $taskId})
      SET t.status = $aggregatedStatus,        // 'done' | 'verified-pending' | 'blocked'
          t.verification_evidence = $evidence, // see table above
          t.updated = datetime()

    Branching for $aggregatedStatus:
      - If ALL phases were PASS: $aggregatedStatus = 'done'
      - If ANY phase was UNVERIFIED: $aggregatedStatus = 'verified-pending'
      - If ANY phase was BLOCKED (with override): $aggregatedStatus = 'blocked'

    Write aggregated status to .tl/status.json for this UC
    UC is considered DONE only when ALL phases PASS

    HALT contract: If $aggregatedStatus = 'done' but no `Regression test:`
    path was parsed from either BE or FE report, HALT with:
      "WAVE HALTED — UNVERIFIED (UC###: aggregated PASS without parseable
       Regression test path; refusing to write t.status='done' without evidence)"
    Do NOT silently write evidence = '' or skip the SET — that is the bug
    that produced the v0.13.0 "Verification gap" reports. (The NO-TEST
    flag that previously offered an escape hatch from this HALT was
    REMOVED in W4-blocking-release; emergency mode is the only bulk-
    bypass path now.)

REMINDER: Do NOT return WAVE_RESULT after Step 1 or Step 3. Continue executing
Steps 2 through 8 before considering any UC complete.

After ALL UCs have reached Step 8 (or explicitly failed), return:

WAVE_RESULT:
  wave: N
  status: complete|partial
  tasks:
    - UC001: done [PASS] (all 8 phases complete, graph: done)
    - UC003: done [UNVERIFIED] (all phases complete, no test exercises change,
             graph: verified-pending)
    - UC005: FAILED [REGRESSION] at phase "qa" (3 retries -- regression detected)
  status_summary:
    pass: 1
    unverified: 1
    blocked: 0
    regression: 1
  headline: FULL APPLIED — UNVERIFIED
  problems: [list of unresolved issues with details]

Headline selection rules:
  - ALL tasks PASS → FULL COMPLETE
  - ANY task REGRESSION → FULL INCOMPLETE — REGRESSION
  - ANY task UNVERIFIED (and no REGRESSION) → FULL APPLIED — UNVERIFIED
  - ANY task BLOCKED (and no REGRESSION/UNVERIFIED) → FULL APPLIED — BLOCKED
  - ANY task NO_INFRA / RUNNER_BROKEN → FULL HALTED — {suffix}

L0 receives each Wave result

After each wave completes:

1. Parse the wave summary
2. Record results (done / failed tasks)
3. Verify graph state -- run tl_progress_by_wave to confirm updates persisted:

   MATCH (t:Task)-[:IN_WAVE]->(w:Wave {number: $waveNum})
   RETURN t.id AS task_id, t.status AS status,
          t.phase_be, t.phase_fe, t.phase_sync,
          t.phase_review_be, t.phase_review_fe, t.phase_qa
   

4. If all tasks in wave done -> proceed to next wave
5. If some tasks failed -> record in problems list, proceed to next wave
6. Launch next wave agent

---

Phase 3: Finalization (L0 -- this agent)

After all waves complete:

Step 3.0: Phase Completion Validation <- MANDATORY before END GATE

Before declaring execution complete, query Neo4j to verify every UC task:

// Verify all tasks have terminal status
MATCH (t:Task)-[:IN_WAVE]->(w:Wave)
WHERE t.type = 'uc' AND t.status <> 'done' AND t.status <> 'failed'
RETURN t.id AS task_id, t.title AS title, t.status AS status,
       w.number AS wave,
       t.phase_be, t.phase_fe, t.phase_sync,
       t.phase_review_be, t.phase_review_fe, t.phase_qa
ORDER BY w.number, t.id

For each UC that is NOT in terminal state (done, verified-pending, blocked, or failed):

IF any phase is pending/in_progress (and task not explicitly FAILED):
  -> UC is NOT complete -- do NOT proceed to END GATE
  -> Identify which phase is incomplete
  -> Re-launch Wave Agent for that UC starting from the incomplete phase:
    "Continue UC### from phase [X]. All previous phases are done."
  -> Wait for completion
  -> Re-query graph to validate

Status-aware terminal states:
  done             -- all phases PASS
  verified-pending -- any phase UNVERIFIED (fix applied, no test covers it)
  blocked          -- any phase BLOCKED (pre-existing failures, user override)
  failed           -- phase failed after 3 retries, or REGRESSION

A phase reaches 'approved' ONLY when sub-skill status is PASS.
For UNVERIFIED sub-skill output, phase remains 'ready_for_review'.

ONLY when all UCs are in a terminal state -> proceed to Step 3.1

This validation prevents false "EXECUTION COMPLETE" reports when dev is done but review/sync/QA are still pending. It also prevents 'approved' from being written when the sub-skill returned UNVERIFIED.

Step 3.1: Final Stub Scan

Launch Task agent: /nacl:tl-stubs --final. Record result from agent output. Do NOT run inline -- stub scanning reads all source files and will bloat L0 context.

Step 3.2: END GATE -- Final Report

Query final progress from Neo4j:

// Final progress summary
MATCH (t:Task)-[:IN_WAVE]->(w:Wave)
RETURN w.number AS wave, w.name AS wave_name,
       t.id AS task_id, t.title AS title, t.type AS type,
       t.status AS status
ORDER BY w.number, t.id

Display the complete project report:

===============================================================
              PROJECT EXECUTION COMPLETE
              (source: Neo4j graph)
===============================================================

Project: [Name]

TECH Tasks: M total
  [done] TECH-001: Docker Compose Setup      (1 iteration)
  [done] TECH-002: CI/CD Pipeline            (2 iterations)
  [done] TECH-003: Database Migrations       (1 iteration)

UC Tasks: N total
  Wave 1:
    [done] UC001: Create Order    [PASS]        (all 8 phases complete, graph: done)
    [done] UC002: List Orders     [PASS]        (all 8 phases complete, graph: done)
  Wave 2:
    [unverified] UC003: Edit Order [UNVERIFIED] (phases complete, no covering test,
                                                 graph: verified-pending)
    [FAIL] UC005: Export Orders    [REGRESSION] (FAILED at QA, 3 retries)
  Wave 3:
    [done] UC004: Delete Order    [PASS]        (all 8 phases complete, graph: done)

Summary:
  Completed:  M/M TECH + (N-2)/N UC done
  PASS:        3 UCs (graph: done)
  UNVERIFIED:  1 UC (graph: verified-pending — no test exercises the change)
  REGRESSION:  1 UC (graph: failed — new failure introduced)
  Stubs:       0 critical, 3 warnings, 12 info
  QA:          3/5 passed

Headline: FULL INCOMPLETE — REGRESSION
(FULL COMPLETE when all PASS; FULL APPLIED — UNVERIFIED when any UNVERIFIED
 and no REGRESSION)

Problems requiring attention:
  1. UC005: QA test "export generates valid CSV" fails -- ExportService
     returns empty array. See .tl/tasks/UC005/qa-report.md

Artifacts:
  .tl/master-plan.md          -- Development plan
  .tl/status.json             -- Final status
  .tl/changelog.md            -- Full change history
  .tl/stub-registry.json      -- Stub registry
  Neo4j graph                 -- Task/Wave nodes with final phase status

Next steps:
  - Fix UC005 manually, then: /nacl:tl-full --task UC005
  - Deploy to staging: /nacl:tl-deliver
  - Review progress: /nacl:tl-status
===============================================================

---

Resumption Logic

On start, if Task nodes exist in Neo4j with non-pending status, resume instead of starting fresh.

State Detection from Graph

// Find the first incomplete phase for each UC task
MATCH (t:Task)-[:IN_WAVE]->(w:Wave)
WHERE t.status <> 'done' AND t.status <> 'failed'
RETURN t.id AS task_id, t.title AS title, t.type AS type,
       w.number AS wave,
       t.status AS status,
       t.phase_be, t.phase_fe, t.phase_sync,
       t.phase_review_be, t.phase_review_fe, t.phase_qa
ORDER BY w.number, t.id

Phase-based resume logic:

TECH tasks:
  pending              -> start from /nacl:tl-dev
  in_progress          -> /nacl:tl-dev --continue
  ready_for_review     -> /nacl:tl-review
  approved/done        -> skip

UC tasks (check phase properties in order):
  phase_be = pending/in_progress             -> start from BE dev
  phase_be = ready_for_review                -> BE review
  phase_review_be = rejected                 -> BE dev --continue
  phase_review_be = approved, phase_fe = pending -> FE dev
  phase_fe = ready_for_review                -> FE review
  phase_review_fe = rejected                 -> FE dev --continue
  phase_review_fe = approved, phase_sync = pending -> sync
  phase_sync = failed                        -> fix + re-sync
  phase_sync = done, stubs not scanned       -> stubs
  phase_qa = pending                         -> QA
  phase_qa = failed                          -> fix + re-QA
  phase_qa = done                            -> docs (if not done)
  all phases done                            -> skip

Resume Presentation

===============================================================
            RESUMING -- PROJECT STATE DETECTED
            (source: Neo4j graph)
===============================================================

Project: [Name]
Last updated: YYYY-MM-DD HH:MM

Completed:
  [done]        Wave 0: 3/3 TECH tasks done
  [done]        Wave 1: 2/2 UCs done
  [in_progress] Wave 2: 1/3 UCs done, 1 in progress, 1 pending

Resume point:
  Wave 2, UC004 -- resume from FE development (BE approved)

Continue autonomous execution from this point? [yes/no]
===============================================================

This counts as the START GATE. After user confirms, execute autonomously.

If --yes flag is set -> skip this confirmation and resume immediately.

---

Graph Update Protocol

Every phase transition MUST be written to Neo4j. This is the key difference from nacl-tl-full.

Update Query Template

// Generic phase update -- used after every step completes
MATCH (t:Task {id: $taskId})
SET t.<phase_property> = $newStatus,
    t.status = $overallStatus,
    t.updated = datetime()

Phase Transition Table

Step	Phase property	On start	On success	On failure (after 3 retries)
BE dev	phase_be	in_progress	ready_for_review	failed
BE review	phase_review_be	in_progress	approved	failed
FE dev	phase_fe	in_progress	ready_for_review	failed
FE review	phase_review_fe	in_progress	approved	failed
Sync	phase_sync	in_progress	done	failed
QA	phase_qa	in_progress	done	failed
Docs	--	--	status = 'done'	--
TECH	status	in_progress	done	failed

Overall Task Status

The status property on the Task node reflects the overall state:

Condition	Task.status
No phase started	pending
Any phase in progress	in_progress
All phases complete	done
Any phase failed (after 3 retries)	failed

Dual-Write: Graph + JSON

After each graph update, also update .tl/status.json to keep it in sync. Dev skills and other non-graph-aware tools read from status.json, so it must stay current.

1. Write to Neo4j (primary)
2. IF Neo4j write succeeds -> update .tl/status.json (secondary) -- same phase data
3. IF Neo4j write fails   -> DO NOT advance the phase; DO NOT update status.json;
                             halt with error: "PHASE_ADVANCE_HALTED: Neo4j write failed"

Rule: both stores must be updated atomically, or neither advances. A partial write (JSON updated, graph not updated) creates JSON-vs-graph divergence that is difficult to recover from. Fail loud; do not silently continue.

Outage Recovery

If Neo4j was unavailable during any part of the execution (e.g., write attempts failed, connection refused, or partial phase updates were logged), the operator must run /nacl:tl-diagnose before resuming orchestration. This reconciles JSON state against the graph and surfaces any divergence.

Procedure:

1. Confirm Neo4j is back online (test connection)
2. Run: /nacl:tl-diagnose
3. Review the DIAGNOSTIC-REPORT.md — look for graph-JSON mismatches
4. If mismatches found: graph is the source of truth; overwrite status.json with graph data
5. Only after a clean diagnose (or explicit mismatch resolution) resume with /nacl:tl-full

Skipping this step and resuming directly risks the orchestrator reading stale JSON and advancing phases that the graph still shows as incomplete or failed.

Remote mode (multi-user shared graph)

Everything above is local mode (config.yaml graph.mode absent or local) — unchanged. When graph.mode: remote (one shared graph on a VPS, several developers), the dual-write fence changes per ${CLAUDE_PLUGIN_ROOT}/nacl-tl-core/references/remote-mode-coordination.md:

• Graph is the sole source of truth. A successful Neo4j write is sufficient to advance; the .tl/status.json write becomes a best-effort LOCAL cache (it is per-clone and diverges across developers — never authoritative, never a coordination signal).
• Resume reads the graph only (not status.json); there is no stale-cache fallback — if the graph is unreachable, HALT.
• Claim before working. Before starting a Task, acquire its claim-lock with node ${CLAUDE_PLUGIN_ROOT}/nacl-core/scripts/claim-task.mjs claim --task <id> --dev "$NACL_DEVELOPER_ID" (run the emitted Cypher via mcp__neo4j__write-cypher); if the returned owner ≠ you, the task is held — pick another. Resolve the id with NACL_DEVELOPER_ID="$(node ${CLAUDE_PLUGIN_ROOT}/nacl-core/scripts/resolve-developer-id.mjs --project-root .)" (precedence: $NACL_DEVELOPER_ID env → config.yaml developer.id → auto <git email|user>/<machine-key> — one human on two machines gets two distinct ids with nothing to configure; see ${CLAUDE_PLUGIN_ROOT}/nacl-tl-core/references/remote-mode-coordination.md §3).
• Stamp provenance (updated_by/updated_at) on phase-advance writes.

---

Retry Policy

All retry loops (at L1 and L2 levels) follow:

MAX_RETRIES = 3

for iteration in 1..3:
  1. Fix: /nacl:tl-dev-be UC### --continue  (or appropriate fix command)
  2. Verify: /nacl:tl-review UC### --be     (or appropriate check)
  3. If passed -> break, continue lifecycle
  4. If failed -> log, continue loop

After 3 failures:
  -> Update graph: SET t.phase_<X> = 'failed', t.status = 'failed'
  -> Record failure details (phase, reason, retry log)
  -> Skip to next task (do NOT stop the entire orchestration)
  -> Include in final report problems list

Critical: failures do NOT stop the orchestration. Other tasks continue. Only the failing task is skipped.

---

Parallel Execution Within Waves

Wave agents process UCs sequentially by default. However, for UCs within the same wave that have NO mutual dependencies, L1 can batch L2 calls:

Wave 2 has: UC001, UC003, UC004
  UC001 and UC003: independent -> can parallel
  UC004 depends on UC001 -> sequential after UC001

Execution order:
  Batch 1: /nacl:tl-dev-be UC001 + /nacl:tl-dev-be UC003  (parallel Task calls)
  Batch 2: /nacl:tl-review UC001 --be + /nacl:tl-review UC003 --be  (parallel)
  ... (continue batched phases)
  Then: UC004 (sequential, after UC001 completes)

To check independence, query:

// Check if two tasks are independent (no DEPENDS_ON path between them)
MATCH (a:Task {id: $taskA}), (b:Task {id: $taskB})
OPTIONAL MATCH path = (a)-[:DEPENDS_ON*1..5]-(b)
RETURN path IS NULL AS independent

---

Scope Variants

--wave N

Execute only wave N. Skip all other waves. Load tasks for that wave from graph:

MATCH (t:Task)-[:IN_WAVE]->(w:Wave {number: $waveNum})
OPTIONAL MATCH (t)-[:DEPENDS_ON]->(dep:Task)
RETURN t.id AS task_id, t.title AS title, t.type AS type,
       t.status AS status, collect(dep.id) AS depends_on
ORDER BY t.id

--task UC###

Full lifecycle for one UC. Skip planning. Verify dependencies met via graph. Process all 8 phases.

// Verify all dependencies are done
MATCH (t:Task {id: $taskId})-[:DEPENDS_ON]->(dep:Task)
WHERE dep.status <> 'done'
RETURN dep.id AS blocking_task, dep.status AS blocking_status

If any dependency is not done -> report blockers and STOP.

Launch a single Wave Agent (Task tool) with TASKS: [UC###] -- same L0->L1 prompt as a regular wave. Do NOT run the 8 phases inline at L0.

--feature FR-NNN

Execute only the wave created for feature request FR-NNN. Look up the wave from graph:

// Find wave for a feature request
MATCH (t:Task)-[:IN_WAVE]->(w:Wave)
WHERE t.title CONTAINS $featureId OR w.name CONTAINS $featureId
RETURN DISTINCT w.number AS wave

Equivalent to --wave N where N is the wave assigned to this FR.

SKIP-PLAN flag (REMOVED in W9-ci-clean-checkout)

The SKIP-PLAN flag (was: "skip Phase 0 planning; assume .tl/ already populated and graph already has Task/Wave nodes") was REMOVED in W9-ci-clean-checkout. Phase 0 already detects an already-populated graph (Task/Wave count > 0 in the probe query) and skips the /nacl:tl-plan Task-agent launch in that case. The flag was redundant; its only remaining use case was bypassing planning when the graph WAS empty, which is exactly the case the planning phase exists to handle. Removing the flag eliminates a class of "delivered without a plan" episodes.

There is no override that resurrects the flag. Operators wanting to force a re-plan should clear Task/Wave nodes (or invoke /nacl:tl-plan directly with explicit scope) before re-running /nacl:tl-full.

Bulk-QA-skip flag (REMOVED in W3-blocking-qa)

The bulk-QA-skip flag (previously documented at this position) was removed from this skill in W3-blocking-qa. QA bypass at the full-lifecycle layer is no longer an operator flag — the SKIP-as-PASS failure mode it produced (project-beta UC-200/UC-300 provider-skip episode) is what W3 closed.

Alternatives:

• Single-stage skip (live-deployment stages only): invoke /nacl:tl-qa UC### --skip-e2e. Its scope is exactly LIVE_PROVIDER_SMOKE and PROD_GOLDEN_PATH. The four pre-deployment stages (COMPONENT_QA, LOCAL_RUNTIME_QA, WIRE_CONTRACT_QA, PROVIDER_FIXTURE_QA) still run. If either skipped stage is mandatory for the UC (per the matrix or project override), aggregate is forced to UNVERIFIED — a W4 signed exception with affected_gates naming the specific stage(s) is required to advance.
• Bulk-bypass needs: route through W4 emergency mode (loudly recorded; not a silent flag). See nacl-tl-release / nacl-tl-core for the emergency-mode invocation.

---

What You Do at L0 (This Agent)

Your job as the top-level orchestrator is minimal but critical:

1. Initialize: check graph state, run /nacl:tl-plan if needed
2. START GATE: show plan (from graph), get user approval
3. Delegate waves: for each wave, launch ONE Task agent (L1) with full instructions including the Graph Update Protocol
4. Collect results: parse wave summaries, verify graph state, accumulate problems
5. Finalize: validate all phases via graph query, run final stubs, display END GATE report
6. Handle edge cases: if wave agent crashes, retry the wave once

What You Do NOT Do

• Write code
• Create task files
• Review code
• Run tests
• Read source files
• Make intermediate confirmations
• Execute dev skills directly (always delegate via Task tool)

---

Progress Queries (L0 uses between waves)

Between wave executions, L0 can check progress without reading files:

// Quick progress check
MATCH (t:Task)
RETURN t.status AS status, count(t) AS count
ORDER BY
  CASE t.status
    WHEN 'done' THEN 1
    WHEN 'in_progress' THEN 2
    WHEN 'pending' THEN 3
    WHEN 'failed' THEN 4
    ELSE 5
  END

// Active wave (lowest wave with incomplete tasks)
MATCH (t:Task)-[:IN_WAVE]->(w:Wave)
WHERE t.status <> 'done'
RETURN w.number AS active_wave, count(t) AS remaining_tasks
ORDER BY w.number
LIMIT 1

These are lightweight queries that keep L0's context clean.

---

Error Handling

Neo4j connection failure during execution

If a graph write fails mid-execution, halt phase advancement (the previous "continue with status.json only" path is removed — divergence between the graph and the local status file produces the same dishonest-reporting class addressed elsewhere in this release):

1. Log the error verbatim, including taskId, phase, and the Cypher statement.
2. Persist the in-flight phase result to .tl/status.json for forensic inspection only — do NOT advance the wave.
3. STOP wave execution. Do NOT proceed to the next phase or the next task.
4. At END GATE, report: FULL HALTED — UNVERIFIED (graph write failed for Task <taskId> phase <phase>); resolve Neo4j connectivity and re-run /nacl:tl-full --task <taskId>.
5. Do NOT mark any incomplete UC as done in .tl/status.json — without graph confirmation the run is unverified.

Neo4j unavailable at startup

If the probe query in Step 0.1 fails:

1. STOP. Do not attempt to run without graph.
2. Report: "Neo4j unavailable. Check config.yaml → graph.neo4j_bolt_port (default: 3587). Use /nacl:tl-full for non-graph execution."
3. Suggest: check Neo4j is running, verify connection parameters in ${CLAUDE_PLUGIN_ROOT}/nacl-core/SKILL.md.

Wave agent crash

If a wave agent (L1) returns no result or an error:

1. Retry the wave ONCE with the same prompt
2. If retry also fails -> mark all remaining tasks in that wave as FAILED
3. Update graph: SET t.status = 'failed' for each
4. Continue to next wave

Graph-JSON inconsistency

If graph state and status.json diverge:

• Graph is the source of truth
• Overwrite status.json with graph data
• Log: "Resolved graph-JSON inconsistency for Task $taskId"

---

Reference Documents

Topic	Path
Graph connection and schema	${CLAUDE_PLUGIN_ROOT}/nacl-core/SKILL.md
TL schema (Task/Wave properties)	graph-infra/schema/tl-schema.cypher
Named TL queries	graph-infra/queries/tl-queries.cypher
Agent protocol	${CLAUDE_PLUGIN_ROOT}/nacl-tl-core/references/tl-protocol.md
Task file format	${CLAUDE_PLUGIN_ROOT}/nacl-tl-core/references/task-file-format.md
SA integration	${CLAUDE_PLUGIN_ROOT}/nacl-tl-core/references/sa-integration.md
Stub tracking	${CLAUDE_PLUGIN_ROOT}/nacl-tl-core/references/stub-tracking-rules.md
QA rules	${CLAUDE_PLUGIN_ROOT}/nacl-tl-core/references/qa-rules.md
Sync rules	${CLAUDE_PLUGIN_ROOT}/nacl-tl-core/references/sync-rules.md
Dev environment	${CLAUDE_PLUGIN_ROOT}/nacl-tl-core/references/dev-environment.md

Data Sources

Reads (Neo4j -- via mcp__neo4j__read-cypher)

# TL layer nodes:
- Task (id, title, type, status, wave, priority, phase_be, phase_fe, phase_sync,
        phase_review_be, phase_review_fe, phase_qa, created, updated)
- Wave (id, number, name, status)

# TL layer edges:
- (Task)-[:IN_WAVE]->(Wave)
- (Task)-[:DEPENDS_ON]->(Task)

# Key named queries (graph-infra/queries/tl-queries.cypher):
- tl_progress_by_wave
- tl_active_wave
- tl_progress_stats
- tl_blocked_tasks
- tl_wave_tasks

Writes (Neo4j -- via mcp__neo4j__write-cypher)

# Task node property updates:
- Task.status (pending -> in_progress -> done/failed)
- Task.phase_be, Task.phase_fe, Task.phase_sync
- Task.phase_review_be, Task.phase_review_fe, Task.phase_qa
- Task.updated (datetime)

Reads (Filesystem)

File	Read/Write	Purpose
.tl/master-plan.md	Read	Project name, supplementary info
.tl/status.json	Read+Write	Dual-write target (secondary to graph)
.tl/changelog.md	Read	History (for final report)
.tl/stub-registry.json	Read	Stub counts (for final report)
config.yaml	Read	YouGile columns, build/test commands