Auvik Alerts

Auvik Alerts

Auvik alerts are condition-based notifications generated when a monitored entity (device, interface, network, service) crosses a threshold or changes state. This skill covers the severity model, the status lifecycle, and the dismissal semantics that confuse new users.

Tools

Tool	Use For
auvik_alerts_list	List alerts, filterable by status / severity / tenant
auvik_alerts_get	Full record for one alert
auvik_alerts_dismiss	Acknowledge and hide an alert

Severity

Severity values, in increasing order:

Severity	Meaning
info	Informational - state change, no impact
warning	Worth attention but not service-affecting
critical	Service affecting; respond now
emergency	Highest tier; usually a managed infrastructure device down

Default triage filter is severity >= warning - info alerts drown the queue and are rarely actionable.

Status

Status	Meaning
open	Currently active
dismissed	Acknowledged by a user; hidden from the default UI view
closed	Condition cleared on its own

closed is the only "the problem is fixed" state. dismissed is "a human decided not to look at this" - the underlying condition may or may not still hold.

Dismissal Semantics

Dismissing an alert does not fix the underlying condition.

Auvik's alert engine evaluates conditions on a recurring schedule. If you dismiss an alert and the condition still holds when the engine next evaluates, a new alert (with a new ID) will appear. This is the source of the "we keep dismissing the same alert" pattern in noisy tenants.

Three appropriate uses of dismissal:

1. Known noise - the condition is a confirmed false-positive for this tenant (e.g. link flap on a known-flaky access port on an unmanaged switch).
2. Already-acknowledged - someone has already opened a ticket and is working it; dismissal removes it from the queue.
3. Transient that cleared - the condition cleared between alert fire and triage; dismissing closes the loop.

Two inappropriate uses:

1. Suppressing a real condition - if the device is genuinely down, dismissing buys you 15 minutes of silence before the next alert. Fix the device.
2. Bulk-clearing the queue - if the queue is too noisy, the alert rules need tuning, not dismissal.

Common alertName Patterns

The exact set varies, but in practice these dominate MSP NOC queues:

alertName pattern	Typical real cause
Device unreachable / Device down	Real outage OR credentials problem
Interface down	Link flap, cable, or upstream issue
Configuration changed	Saved config differs from baseline
New device discovered	Discovery picked up an unmanaged device
Backup failed	Config backup attempt did not complete
High CPU / High memory	Device under load
Interface utilization high	Link saturation - cross-check via statistics
SNMP poller failure	Credentials or ACL problem

Entity Resolution

Every alert references an entityId and entityType. To make a good triage decision, you almost always need to pull the entity:

• entityType = device -> auvik_devices_get
• entityType = network -> auvik_networks_get
• entityType = interface -> the parent device via auvik_devices_get

Critical alerts on manageStatus = unmanaged devices are almost always discovery noise, not real incidents.

Workflow

1. auvik_alerts_list status=open (scope by tenant if needed).
2. Order by severity desc, then detectedTime asc.
3. For top-of-queue items, auvik_alerts_get for the full record.
4. Resolve the entity for context.
5. Decide: action, investigate, or dismiss-with-justification.
6. Dismiss only after the user confirms.

Edge Cases

• Some alerts have empty description fields - the alertName plus the entity is the whole signal.
• detectedTime is UTC.
• An alert can reference an entity that has since been deleted in Auvik - the entity fetch will 404. Treat this as evidence the alert is stale and a candidate for dismissal.

Related Skills

• devices
• networks
• api-patterns